Do you know what to pay attentionto when storing multifunction meters? If you don't know, there will be a lot of accidents in storage and you can't prevent and fix them. The following is an analysis of the key points for attention in the storage of multifunction energy meters:
(1) The environment of the multifunction metre is a place that needs the most attention. A good environment can avoid problems during storage, such as products that cannot be used in high-temperature environments and frosting at low temperatures. Usually, the product can be stored in an environment of -25°C to 55°C and it is recommended to store this product in an environment of 25-30°C.
(2) The storage environment of the multifunction metre must be dry and ventilated. A large number of customers store almost most of their products in a sealed environment. In fact, this makes dust build up inside the product, causing most parts to be damaged or unusable due to the ingress of dust. And not just in spaces where dust is sealed, the internal oxidation reaction cannot be used either.
(3) There should be no harmful substances in the environment where the multifunction meter is used or stored. Because when the multifunction meter is used or stored, parts of the product will gradually corrode the product when the multifunction metre is used or stored. An abnormality indicating that the product will continue to be used only in the case of the first use.
The shelf life of the multifunction metre is also very important. If you don't pay much attention to the storage of the product, when it is used, the performance and lifespan of the product are likely to be greatly reduced due to the long storage time, and problems often occur during use. It's best to look at the shelf life in storage and replace the end of the product immediately and avoid using other equipment as the storage time is too long.
If it is stored for too long, the stability of the multifunction meter will frequently decrease during use and it will also threaten your personal safety, such as insulation and safety. If you have this product, please do not continue to use it to avoid a threat to your safety.
Storing any products that require maintenance and multifunction power meters requires far less maintenance than most products. Usually it is only necessary to clean up the product near the product and the dust that accumulates under storage conditions when the product is stored.
The environment must be checked daily to see if it still meets the specified standards. If the temperature is too high or too low, use an air conditioner or other device that can change the ambient temperature. Moisture in the environment can be controlled as early as possible by using a device such as a dehumidifier to avoid entering the interior of the product.
Related Articles about Acrel