Name | Type | Number |
HMI | ATP007/ATP010 | 1 |
Wireless temperature receiver | ATC800-8 | 5 (up to 4 sides per ATC800-8) |
ATE800-B/ATE800-U | 180 (antenna is fully matched, 9 points per cabinet) |
ATE800 series RFID wireless temperature measurement sensors can be used for temperature monitoring of metal parts such as busbar joints, circuit breaker moving and static contacts, cable joints, and ring network cabinet plugs in high and low voltage switch cabinets. They are characterized by complete isolation, easy installation, strong anti-interference ability, and reliable operation. Temperature measurement can be performed normally even when there is no current in the primary circuit. The acquisition frequency is fast and the data is updated quickly. The ATE800 series products consist of: receiver, antenna, and sensor. The ATC800 receiver transmits RFID radio frequency signals to the ATE800 wireless temperature measurement sensor through the antenna. After the sensor receives the radio frequency energy, it activates the circuit, starts temperature data acquisition, and transmits the data back to the antenna through a wireless signal; the antenna transmits the data to the receiver through the radio frequency cable, and the receiver can finally upload the data to the remote monitoring system.
Related Articles about Acrel
Popular Acrel Energy Meter Products Recommended